In what direction does ModXo: Pico get installed?

With the USB port on the Pico facing the RF shield of the XBOX.

Will ModXo: Basic add-ons work with ModXo: Pico?

Yes, ModXo: Pico’s expansion ports are pin compatible with ModXo: Basic.

Will this work with X version of XBOX?

The ModXo: Basic is compatible with all versions of the original XBOX. Visit our GitHub for installation instructions.

Will X BIOS work??

Yes along as it’s been properly packed. Please visit the ModXo GitHub for more instructions on packing your BIOS.

My ModXo: Basic is not booting what could be wrong?

Depending on your XBOX revision it could be a few things. For versions 1.0 - 1.4 make sure your D0 point is either connected to the On the ModXo: Pico or is grounded to a viable ground point. For revision 1.6 make sure your LPC has been rebuilt properly. Instructions can be found on our GitHub.

My LCP and DO are correctly hooked up why won’t my XBOX boot?

This can happen for a few reasons. Reason 1 D1 is installed backwards. If this happens, the RP2040 Tiny will not get any power. Reason 2 R1 - 4, make sure you are using 100ohm resistors and they have a good joint on the ModXo: Pico. Finally, this can happen when D1 fails and the Pico on the carrier is not getting 5V. This can be checked by probing GND and the 5V pin on the RP2040.

What add-ons are available?

All supported add-ons can be found on our GitHub. If you want to request a specific add-on contact us on our site or via our Discord server.